Nissan Maxima QX

since 1993 release

Repair and operation of the car



Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks and fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of temperature of the engine and fuel consumption
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Check of serviceability of functioning, removal and installation of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Running fires of daylight (DRL)
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   The electric drive of the top hatch - general information and check of serviceability of functioning
   The electric drive of front seats - general information and check of serviceability of functioning
   Transfer of management of functioning of onboard consumers of the electric power on dial-up lines
   Safety cushions - the general information
   + Schemes of electric connections

The electric drive of external rear-view mirrors - general information and check of serviceability of functioning

In most cases for the drive of a side rear-view mirror two electric motors are used: one provides adjustment of provision of a mirror in the vertical plane, the second - in horizontal. In addition, on some models the electrical heating of mirrors working at inclusion of heating of back glass is provided.

The switch of control of the electric drive is equipped with the selector knot providing the choice of the direction of giving of tension (on right or on the left mirror). Without starting the engine, turn the ignition key in position of ON, lower door glasses and test all modes of functioning of the electric drive of both side mirrors.

Attentively listen to the sounds made by electric motors of the drive of mirrors.

If aurally the motor works regularly, however the mirror does not change the situation, perhaps, defect of the driving mechanism in a mirror takes place. Remove the corresponding mirror and sort it for search of a cause of failure.

If mirrors do not function and motors of their drives do not make any sounds, check a condition of the corresponding safety lock (see the Head Nastroyki and routine maintenance).

If a safety lock as it should be, remove the switch of management of functioning of the electric drive of mirrors from the support (do not disconnect an electrical wiring). Include ignition and check serviceability of giving of food for the switch. Tension has to take place on one of switch socket plugs, otherwise check a condition of a connecting electrical wiring on the site between the switch and the assembly block of safety locks.

If food moves regularly, disconnect an electrical wiring and check correctness of distribution of provodimost between switch plugs in its various provisions (see the Section Check of Serviceability of Functioning and Replacement of Switches of the Dashboard). Replace the faulty switch.

Restore initial connection of an electrical wiring and find a wire of grounding of assembly of the switch. Duplicate grounding by a wire crossing point. If now the motor begins to function, it is necessary to restore quality of grounding of assembly on weight.

If grounding as it should be, and the drive still does not work, remove assembly of a mirror and check serviceability of giving of supply voltage for it. Include ignition and transfer the selector switch of assembly of management to adjustment of the corresponding mirror. When moving a key of adjustment of provision of a mirror to any of working provisions on the drive of the last tension has to move.

At identification of violations in giving of food check a condition of an electrical wiring on the site between the switch and the drive.

If tension moves regularly, remove a mirror and check serviceability of functioning of the drive by a direct zapityvaniye it from the battery. Replace a faulty mirror.