| System type |
electronic 4-channel/4-touch ABS with systems of electronic distribution of brake effort and Brake Assist (perhaps to order). Ventilated disk forward, disk or drum back, a diagonal contour, the hydrovacuum amplifier |
| Type of brake fluid |
See the Head Nastroyki and routine maintenance
|
|
Disk brake mechanisms
|
| Brake mechanisms of forward wheels |
| Type |
| Models 1993 and 1994 of вып |
CL25VB |
| Models since 1995 of the issue. |
CL25VB or CL25VE |
| Diameter of an opening of the cylinder, mm |
| CL25VB |
57.2 |
| CL25VE |
40.2 |
| Geometrical parameters of blocks (length x width x thickness), mm |
| CL25VB |
125.6 x 45.3 x 11 |
| CL25VE |
140.0 x 45.3 x 11 |
| Geometrical parameters of a brake disk (diameter x thickness), mm |
| CL25VB |
280 x 22 |
| CL25VE |
280 x 26 |
| Brake mechanisms of back wheels |
| Type |
| Models 1993 and 1994 of of the issue. |
CL9H |
| Models since 1995 of the issue. |
CL9HB |
| Diameter of an opening of the cylinder, mm |
| CL9H |
33.96 |
| CL9HB |
33.96 |
| Geometrical parameters of blocks (length x width x thickness), mm |
| CL9H |
75.0 x 40.0 x 9 |
| CL9HB |
89.1kh 39.5 x 10 |
| Geometrical parameters of a brake disk (diameter x thickness), mm |
| CL9H |
258 x 10 |
| CL9HB |
278 x 9 |
| Minimum admissible thickness of brake shoes |
See the Head Nastroyki and routine maintenance
|
| Minimum admissible thickness of a brake disk, mm |
See the marking cast on a disk |
| Maximum admissible size of a beating of a brake disk, mm |
| Forward brake mechanisms |
0.07 |
| Back brake mechanisms |
0.15 |
| Maximum admissible size of variations of thickness of a brake disk, mm |
| Forward brake mechanisms |
0.01 |
| Back brake mechanisms |
0.02 |
|
Drum brake mechanisms of back wheels
|
| Minimum admissible thickness of frictional overlays of brake boots, mm |
See the Head Nastroyki and routine maintenance
|
| Maximum admissible internal diameter of a drum, mm |
See the marking cast on a disk |
| Maximum admissible size of ovality of a drum, mm |
0.03 |
|
Main brake cylinder
|
| Diameter of an opening of the cylinder, mm |
23.81 |
|
Vacuum amplifier of brakes
|
| Type |
| Models 1993 and 1994 of of the issue. |
M195-V1125T |
| Models since 1995 of the issue. |
M215T |
| Diameter of a diaphragm, mm |
| M195-V1125T |
| Primary diaphragm |
205 - 230 |
| Secondary diaphragm |
180 - 205 |
| M215T |
| Primary diaphragm |
230 |
| Secondary diaphragm |
205 |
| Length of an exit of a rod of a pusher, mm |
10.275 ÷ 10.525 |
| Distance from assembly of the amplifier to a cutting finger of a rod, mm |
125 |
|
Adjustments of a pedal of a foot brake
|
| Height of situation in the released state, mm |
| Models with RKPP |
159 ÷ 165 |
| Models with AT |
169 ÷ 174 |
| Free wheeling, mm |
0.04 ÷ 0.12 |
| Height of provision of the squeezed-out pedal, mm |
| Models 1993 and 1994 of of the issue. |
90 |
| Models since 1995 of the issue. |
| Models with RKPP |
70 |
| Models with AT |
75 |
|
Parking brake
|
| Drive |
Lever |
| The number of clicks of a ratchet when applying effort in 20 kgfs |
| Models 1993 and 1994 of of the issue. |
8 ÷ 10 |
| Models since 1995 of the issue. |
10 ÷ 11 |
| The number of clicks of a ratchet before operation of the sensor switch of a control lamp |
| Models 1993 and 1994 of of the issue. |
1 ÷ 2 |
| Models since 1995 of the issue. |
1 |
|
Sensor switch of stoplights
|
| Gap size between a plunger of the sensor switch and an emphasis of a pedal, mm |
0.3 ÷ 1.0 |
|
Efforts of tightening of threaded connections
|
Nanometer
|
| Nuts of fastening of the servo-driver of the vacuum amplifier of brakes |
| Models 1993 and 1994 of of the issue. |
8 ÷ 11 |
| Models since 1995 of the issue. |
13 ÷ 16 |
| Bolts of fastening of supports (lobbies and back disk brake mechanisms) |
22 ÷ 31 |
| Bolts of fastening of an anchor bracket |
| Forward brake mechanisms |
72 ÷ 97 |
| Back brake mechanisms |
38 ÷ 52 |
| Hollow bolt of nipple knot of connection of a brake hose to a support of the brake mechanism (forward or back) |
17 ÷ 20 |
| Bolts of fastening of wheel cylinders |
6 ÷ 11 |
| Gates of pumping of supports and wheel cylinders |
7 ÷ 9 |
| Nuts of fastening of GTTs |
| Models of 1993 of the issue. |
8 ÷ 11 |
| Models since 1994 of the issue. |
12 ÷ 15 |
| Bolts of fastening of wheels |
See the Head Nastroyki and routine maintenance
|