Nissan Maxima QX

since 1993 release

Repair and operation of the car



Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks and fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of temperature of the engine and fuel consumption
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Check of serviceability of functioning, removal and installation of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Running fires of daylight (DRL)
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   The electric drive of the top hatch - general information and check of serviceability of functioning
   The electric drive of front seats - general information and check of serviceability of functioning
   Transfer of management of functioning of onboard consumers of the electric power on dial-up lines
   Safety cushions - the general information
   + Schemes of electric connections

Removal and installation of the radio receiver and loudspeakers

 The models of cars considered in the present manual are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid getting injured at its casual operation (see the Section Electric Drive of Front Seats - general information and check of serviceability of functioning). It is easy to distinguish an electrical wiring of a chain of SRS on yellow color of isolation.

Radio receiver/CD player

 PERFORMANCE ORDER

1. Disconnect SRS (see the Section of the Safety cushion - the general information).
2. Remove facing of the central section of the dashboard and the plastic panel directly under an ashtray (see the Head Kuzov).

3. Turn out fixing screws and take assembly of the radio receiver with the control panel of functioning of a heater from the landing nest in the dashboard, disconnect an electrical wiring and an antenna cable from assembly.

4. Disconnect an antenna cable and a connecting electrical wiring, then turn out screws of two side basic arms and separate the radio receiver/CD player from assembly of the control panel of functioning of a heater.

5. Installation is made upside-down.

Loudspeakers

Door loudspeakers

 PERFORMANCE ORDER

1. Remove the panel of an upholstery of a forward door (see the Head Kuzov).

2. Turn out fixing screws, take assembly of a loudspeaker from the landing nest and disunite the electrical wiring socket.

3. Installation is made upside-down.

Back loudspeakers

 PERFORMANCE ORDER

1. Remove the back shelf (see the Head Kuzov).

2. Turn the back shelf, turn out fixing screws and remove a loudspeaker.

3. Installation is made upside-down.