|
|
Flasks of lamps of halogen type are filled with the gas which is under pressure and at sharp stirring can blow up. Try to take such lamps only for a socle and use goggles. Remember that at a flask contact with naked fingers on glass there are fatty spots that leads to a premature exit of a lamp out of operation as a result of an overheat. Before installation wipe a lamp flask with alcohol.
|
|
|
1. Open a cowl. Find lamp assembly on back the parties of a casing of a head block headlight. When replacing a lamp of the right block headlight remove a plastic guard. |
2. Disconnect an electrical wiring and remove a lock ring.
|
|
3. Take assembly of a lamp with the boss from a block headlight casing. |
4. Trying not to touch a flask, release a lamp from the boss and establish replaceable on its place. Fill assembly in a casing of a block headlight and record it a lock ring.
5. Connect an electrical wiring. Check serviceability of functioning of headlights. Close a cowl. |