|
1. On all models the hummock drive of remote opening of a door of the hatch of a jellied mouth of the fuel tank is provided. Unlocking of the lock of a cover of the luggage compartment on one models is also made by a driving cable, on others the electromagnetic activator is provided.
2. In the luggage compartment remove the left side panel of finishing for the purpose of ensuring access to a tip of a cable of the drive of the lock of a door of the hatch of a jellied mouth. At an open door extend a cable outside so that the plastic casing of a tip completely left in a compartment of a jellied mouth. Delay a tip outside and remove a casing from an old cable.
3. Unbend a carpet for the purpose of ensuring access to a driving cable. Release all intermediate clamps of fastening of a cable to body panels. Location of a cable of unlocking of the lock of the luggage compartment is described in the Section Removal and installation of a latch and the cylinder of the lock of a cover of the luggage compartment. On some models instead of hummock the electromagnetic drive of unlocking of the lock is provided, however both mechanisms are connected to a latch in one place.
|
|
4. Delay a carpet near a driver's seat for the purpose of ensuring access to the otpuskaniye mechanism lever. Give a nut of fastening of a tip of a cable(s) to a hairpin, then disconnect a cable(s) from the lever. |
5. Tie up a string piece by the end of a cable.
6. Involve a cable in the luggage compartment, having left a string passed throughout the body panel.
7. Tie up a new cable to a string, involve in salon and connect to the lever. Further installation is made as it should be the return to an order of dismantle of components. |