Nissan Maxima QX

since 1993 release

Repair and operation of the car

Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and precautionary measures
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal and installation of a decorative front grille
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of the panel of a forward reflector
   Removal and installation of panels of an internal upholstery of doors
   Removal, installation and adjustment of doors
   Removal and installation of a latch, cylinder of the lock and handles of a door
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of rear-view mirrors
   Removal, installation and adjustment of a cover of the luggage compartment
   Removal and installation of a latch and cylinder of the lock of a cover of the luggage compartment
   Removal and installation of driving cables of an otpuskaniye of locks of a cover of the luggage compartment and door of the hatch of a jellied mouth of the fuel tank
   Removal and installation of the central console
   Removal and installation of finishing sections of the dashboard
   Removal and installation of sections of a casing of a steering column
   Removal and installation of the main section of the dashboard
   Removal and installation of seats
   Removal and installation of the back shelf
   Adjustment of the top hatch
   Body sizes
+ Onboard electric equipment

Removal, installation and adjustment of a cover of the luggage compartment


The cover has the considerable weight therefore it will be reasonable to secure with the help of the assistant.

1. Open a cover of the luggage compartment and reliably record it in the top situation. Cover the painted panels of edges of an aperture with protective slips or old blankets.
2. Disunite sockets of the electrical wiring preventing dismantle of a cover.

3. Lead round levels of door loops a marker.

4. Turn out bolts of fastening of loops to a cover and by means of the assistant remove the last.
5. Installation is made upside-down. Track that loopy levels were put according to the tags put in the course of dismantle.
6. Having finished installation of a cover, close it and make sure of correctness of placement in a body aperture.
7. Updating of the provision of a door in the horizontal direction is made by weakening of loopy bolts and shift of levels within the stock determined by ovality of bolted openings in them. Having corrected the provision of a cover, do not forget to tighten fixture.
8. For updating of the provision of a cover in the vertical plane it is possible to use adjusting washers which are enclosed under loopy levels.

9. For adjustment of height of provision of a cover in a body aperture weaken bolts of fastening of assembly of the drummer of the lock, as appropriate correct position of the last, then again tighten fixture.

 Before weakening of bolts for orientation lead round a plate of the basis of the drummer a marker.