1. Remove the panel of an internal upholstery of a door and the film insulating screen (see the Section Removal and installation of panels of an internal upholstery of doors). 2. Remove a windowpane (see the Section Removal and installation of door glasses).
|
3. Disconnect an electrical wiring and turn out bolts of fastening of an electric motor of the drive of the regulator. |
|
4. Turn out bolts of fastening of the regulator in the top and lower parts of a doorframe. |
5. Take assembly of the regulator through a technological opening at doors. 6. Installation is made upside-down. |