Nissan Maxima QX

since 1993 release

Repair and operation of the car



Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Control systems of the engine
   General information
   System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
   Removal and RSM installation
   Check of serviceability of a state, replacement and adjustment of the sensor of provision of a butterfly valve (TPS)
   Check of a state and replacement of the sensor of measurement of mass of an air stream (MAF)
   Check of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
   Check of a state and replacement of the sensor of temperature of cooling liquid of the engine (EST)
   Check of a state and replacement of the sensor of provision of a bent shaft (ICR)
   Check of a state and replacement of the sensor of position of the camshaft (SMR)
   Check of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of a state and replacement of the oxygen sensor (l-probe)
   Check of a state and replacement of the sensor of a detonation
   Check of a state and replacement of the sensor of temperature of fuel of speed of the movement of the car (VSS)
   Check of a state and replacement of the sensor of speed of the movement of the car (VSS)
   Check of a state and replacement of components of system of stabilization of turns of idling
   Control system of functioning of the power valve
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
   The catalytic converter - the general information, check of a state and replacement
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

System of the operated ventilation of a case (PCV)

 PERFORMANCE ORDER

1. The PCV system serves for decrease in issue in the atmosphere of hydrocarbonic connections at the expense of a conclusion from the engine of crankcase gases. The purge of the block is carried out by a pro-race of the fresh air arriving from the air cleaner through a case in which it mixes up with the collected evaporations and the gases which broke from combustion chambers and is removed via the PCV valve in the inlet pipeline.

2. The PCV valve, the filter of a purge and a set of the vacuum hoses connecting the listed devices to the engine are among the main components of system.
3. For the purpose of maintenance of stability of turns of idling the PCV valve blocks a purge stream at deep depression in the inlet pipeline. In case of violation of serviceability of functioning of the engine (as, for example, at wear of piston rings) the system makes withdrawal of excess of crankcase gases through a ventilating tube back in the air cleaner.
4. The description of procedures of check and replacement of the PCV valve is provided in the Head Nastroyki and routine maintenance.