Nissan Maxima QX

since 1993 release

Repair and operation of the car



Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
- Settings and routine maintenance
   Schedule of routine maintenance of the Nissan Maxima cars
   General information
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF level of automatic transmission
   Replacement of motive oil and oil filter
   Check of a condition of seat belts
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the rechargeable battery
   Check of a state, adjustment of effort of a tension and replacement of a driving belt
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of a condition of components of a power supply system
   Check of the brake system
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of the RKPP gearbox oil
   Replacement of the filtering air cleaner element
   Replacement of the fuel filter
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Service of the cooling system (depletion, washing and filling)
   Replacement of ATF of automatic transmission and main transfer
   Replacement of the RKPP gearbox oil
   Check of a condition of components of a suspension bracket and steering drive
   Check of a condition of the EGR valve
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Replacement of the filtering air cleaner element

 PERFORMANCE ORDER

1. Replacement of the filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the condition of the filter has to be checked rather often, in particular in the conditions of strongly dusty area. The filtering element is placed in the casing established in the left part of a motive compartment. Release four spring clamps, lift a cover and take the filtering element from a casing.

2. Visually estimate a condition of the filtering element, in case of strong pollution make replacement. The filter which is moderately hammered with dust can be blown compressed air (through a back surface).

When using compressed air surely put on goggles! The filtering element made of wax paper cannot be washed out with use of oils or solvents if it is not possible to achieve satisfactory result by a purge, make replacement.

In order to avoid premature wear of internal components of the engine and emergence of flashes in a final path do not operate the car with the taken air filter!

3. Carefully wipe an internal surface of a casing of the air cleaner.
4. Establish the replaceable filtering element, track correctness of its landing in a casing.
5. Put into place a cover and fix it by four spring clamps.