Nissan Maxima QX

since 1993 release

Repair and operation of the car


Nissan Maxima QX
+ Cars of the Nissan Maxima brand
+ Maintenance instruction
- Settings and routine maintenance
   Schedule of routine maintenance of the Nissan Maxima cars
   General information
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of the ATF level of automatic transmission
   Replacement of motive oil and oil filter
   Check of a condition of seat belts
   Check of a state and replacement of brushes of screen wipers
   Check, service and charging of the rechargeable battery
   Check of a state, adjustment of effort of a tension and replacement of a driving belt
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a condition of components of the cooling system
   Rotation of wheels
   Check of a condition of components of a power supply system
   Check of the brake system
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of the RKPP gearbox oil
   Replacement of the filtering air cleaner element
   Replacement of the fuel filter
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, cover and runner of the distributor
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Service of the cooling system (depletion, washing and filling)
   Replacement of ATF of automatic transmission and main transfer
   Replacement of the RKPP gearbox oil
   Check of a condition of components of a suspension bracket and steering drive
   Check of a condition of the EGR valve
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of a condition of components of system of production of the fulfilled gases

 PERFORMANCE ORDER

1. Having waited for full cooling of system of production of the fulfilled gases (not less than three hours later after an engine stop), attentively examine all its components, beginning from a flange of fastening of a reception pipe to a final collector, and finishing with a cut of an exhaust pipe. For providing free access under the car hang out it by means of the winch, or tire out on a platform or a viewing hole.
2. Check sections of system and the place of their joints for existence of signs of leak of the fulfilled gases, traces of corrosion and mechanical damages. Make sure of reliability of tightening of fixture. Check a state and durability of fastening of arms and rubber suspensions of components of system.
 

And — the Reception pipe
In — Rubber suspensions
With — the Catalytic converter

 

And — the Muffler
In — the Connecting flange of zadnikhsektion
With — the Exhaust pipe

3. At the same time examine the vehicle bottom on existence of holes, traces of development of corrosion, a divergence of the welded seams and other damages allowing the fulfilled gases to get into interior of the car. Seal all found openings with silicone or usual body filling.
4. The roar and many other extraneous noises during the movement often are a consequence of weakening of fixture of components of system of production of the fulfilled gases, or shifts of its sections. Attentively check a condition of arms and suspensions, pull pipes, the muffler and the catalytic converter, checking whether they adjoin to elements of the bottom or a suspension bracket. In case of need replace components of support of system.
5. On appearance of a cut of an exhaust pipe it is possible to estimate the general working condition of the engine with high degree of reliability. The consistence and color of the deposits covering the end of a pipe allow to reveal violations of adjustments of the engine. If the pipe is covered with black sazhisty deposits, or on it the raid of whitish color, the engine, together with a power supply system was formed, needs control.